Tag: personal training
-
What to do When You Stop Making Progress in the Gym
Have you ever been making steady progress in the gym only for you to spend an extended period of time not making any progress? In this article we will discuss what you can do when you hit a plateau with your progress in the gym.
In previous articles, we have discussed why it is important to train close to failure and to sometimes, even, train all the way to failure. But what happens if we train to failure every set every time we train? It might surprise you to learn that we actually do continue to make progress when training to failure every set; however, after a short time (1-2 weeks) we will be training a specific muscle group before it has had time to fully recover. Without giving our bodies time to dissipate these effects, this will result in us accumulating fatigue from one session to the next. This does not mean we will not be making progress but rather the progress we are making will become masked by our accumulated fatigue.
For example, on a Barbell Back Squat, let’s say we are able to do 8 reps with 185 lb on the bar and we train every set until complete failure; the next week our muscles will likely be stronger and able to move more weight but we are unable to actually go up in weight on the bar because we are still fatigued from our last session where we did Barbell Back Squat.
Too much accumulated fatigue is one of the most common reasons for plateauing in the gym. But what can we do to avoid this? And what can we do if we have already accumulated too much fatigue?
In order to avoid this, take a look back at the past articles titled: “How to Train for Muscle Growth” and “The Importance of Tracking your Progress in the Gym”. These articles outline how to safely and effectively implement progressive overload and how to train close to failure without accumulating too much fatigue.
If you have already accumulated too much fatigue and want to get back on track, it is advisable to take a “deload” or “active recovery” week. The purpose of this is to allow fatigue to completely dissipate before we begin serious training again while still keeping all of the strength we have gained up to this point. One strategy we can take for a deload is to do the same training we have been doing, using 100% of the weight we were using BUT only doing 50% of the total volume. So if we had 4 sets of 8 on the Barbell Back Squat, to deload we would use the same weight but only do 2 sets instead of 4. This way we continue to hold the strength we have gained but do a small amount of total volume, so we aren’t accumulating too much fatigue.
Another strategy you can take to dissipate fatigue is to begin a new training program. During the first week of a training program with new exercises, we never exactly know what our working weight is right away. So we can start with the weight low and work up from there. For example, if you have 4 sets of 8 reps, start with the weight low, and work up from there to the point where only the last one or two sets are at our working intensity (~5 reps in reserve).
[Sample progression for Barbell Back Squat]
- Set 1: 115lb x 8
- Set 2: 135lb x 8
- Set 3: 165lb x 8
- Set 4: 185lb x 8
This will allow us to learn the correct technique of the exercises we will be doing next, while still using the muscles we want to keep our strength with so that we do not lose any of it. You can see how this strategy is similar to the deload week but this way, we can use our “deload” time to practice the technique for future exercises.
If you or anyone you know is interested in taking their training more seriously and taking all of the guesswork out of your training decisions, give us a call (312-666-7147) or send us an email (info@performancetrainingsystems.com) and one of our many qualified professionals will be happy to help!
References
- Helms, 2015
- Schoenfeld, 2016
-
Staying on Track with Fitness Goals During the Holidays
With New Year’s Eve coming up we know that we will all be tempted to indulge in food and drinks to celebrate and bring in the New Year. This article will discuss what we can do to stay on track with our fitness goals while still being able to enjoy our time around friends and family.
The bottom line is that we should not let our fitness goals get in the way of enjoying our lives. That being said, there are definitely some strategies we can take to keep us from drifting too far from our goals.
The first, and easiest strategy we can take is to get some exercise on the day you know you will be celebrating. As long as the intensity is high enough, we will experience excess post oxygen consumption (EPOC) from exercise (strength training, biking, running, rowing, stair master) where we will increase our calories burned as our body continues to deliver oxygen to our working muscles throughout the rest of the day. If you know you will be eating or drinking more than usual, do a little extra exercise as this will help us stay on track and avoid us from gaining unnecessary weight. Exercise leading up to the celebration is a great way to get ahead of everything but what should we do during our celebrations?
The issue we find with New Year’s Eve festivities is that those of us over the age of 21 have a tendency to drink alcohol. Drinking calories is counterintuitive to our fitness goals because we do not get as full from drinking our calories as compared to eating food.
One contributing factor of satiety (how full we get) is time spent chewing and since we do not chew liquids, we do not get as full. Something we can do to combat this is obviously not to drink but for those of us who still might have a few drinks, we can choose drinks with clear alcohol (white rum, vodka, tequila, gin, etc.) as these have significantly lower calorie content than dark liquor (dark rum, whiskey, bourbon, etc.) or beer.
If you are someone who mixes alcohol with soda, opting for a diet soda or tonic/seltzer water is a good alternative. When consuming alcohol, we should try to drink at least half of the fluid we drink in alcohol in water. So, if we drink 32 Oz. of alcohol throughout the night, we should at least drink 16 Oz. of water. Consuming electrolytes will also help our body retain the water we drink; so beginning the night with a low sugar sports drink or cup of water with an electrolyte packet would help us stay hydrated even more!
Regardless, if you take part in drinking alcohol or not, we should all make a serious effort to eat well during this time. We discussed the rather obvious issue there is with drinking calories during the holidays but what isn’t as obvious is what we can do with our diet. The issue here comes from the macronutrient composition of the foods that are commonly served at holiday parties. Since this is a time of celebration, most of the food served at these events tend to either be high in fat, or high in sugar as we enjoy these the most.
Foods with a combination of high fat and high sugar do not naturally occur in the world. Since our body’s physiology is built through evolutionary adaptations, as soon as we sense this non-naturally occurring food substance high in sugar (fast absorbing energy) and fat (high concentration of energy) we are immediately signaled (with dopamine) to eat as much as we possibly can as our bodies are unsure when we will be able to consume this much energy again. This is highly individual but can be the reason some of you may notice it is easier to abstain from eating certain foods rather than only have a little bit – once the flood gates open there’s no stopping.
Staying away from these foods is a good idea but keeping our consumption of them low is also an acceptable strategy to take as long as you have good self-control. In addition to staying away from foods high in fat and sugar, we can try to fill ourselves up on protein (we need this to recover from our training and to meet our fitness goals) so that we are already too full to stuff ourselves by the time dessert comes around.
As we said before, the most important part of all of this is to not let our fitness goals get in the way of us enjoying our time spent around friends and family. It is important for us to make an effort to be healthy but only if it does not take away from us enjoying the moments that matter most.
If you have ever wondered what you could be doing differently during the holidays to continue to meet your goals, give us a call (312-666-7147) or send us an email (info@performancetrainingsystems.com) and one of our many qualified professionals eager to help will be in touch with you!
-
How to Train For Muscle Growth
If you have ever tried to exercise on your own and have found that your progress stalls out after a few weeks of training, this article is for you! We will be discussing how you should be training in order to ensure you continue to make progress.
The most important aspect of any training program is the implementation of what we call “Progressive Overload”. If we implement progressive overload in our training, all this means is that over time, our training increases in difficulty as we challenge ourselves more from week to week.
Our bodies are always adapting to meet the demands of our daily activities. If the difficulty of our training remains the same, our bodies have no reason to continue to improve. As long as our body thinks it can handle what it needs to do during a training session, in an effort to conserve energy, we will only adapt to meet the demands required for training and will have our progress plateau. So, you can see, as demands for training increase over time, so do the adaptations we experience. The most important part of progressive overload is making sure the demands for training are increasing over time.
The extent to which our strength improvements can be made while utilizing progressive overload will be determined by the amount of fatigue we accumulate from one training session to another – this corresponds to how close to “technical failure” we go. Proper management of these two aspects of training are incredibly important for avoiding plateaus with our progress over time.
An example of using fatigue management in a training program would be if we were doing 4 sets of 10-12 reps, for example, we would want the first set to be relatively easy; then, as fatigue sets in, using the same weight, each following set will increase in difficulty until the last set (or two) are close to if not all the way to “technical failure”. The term “technical failure” refers to the point where, during a set, fatigue no longer allows you to perform the exercise with correct form; if your form begins to break down and you start to cheat, that is technical failure and where we want to stop the set.
If we go too hard and are close to failure the first set, fatigue will set in too soon and we will already be unable to get the same reps as before only after the first set! On the other hand, only using the last one or two sets to train close to failure will allow us to still challenge ourselves without accumulating too much fatigue and run the risk of not being able to recover in time for our next training session.
Using this set-to-set progression will allow us to frequently train close to, if not all the way to failure. Training to failure every set will be too much fatigue for us to recover from before our next training session. There is significant scientific data regarding what level of intensity provides the most stimulus for us to improve strength. What has been found is that training within 5 repetitions to failure (or 5 reps in the tank) provides an almost identical strength improving stimulus as all the way to failure. So, training at 5 reps in the tank would be ideal as this would allow us to minimize fatigue accumulation however, if we never actually train to complete failure, we never really know how close to it we are. So, something could feel like 5 reps in the tank but actually be 6,7, or 8, and then we start leaving some progress on the table that could have been gained.
Using the information above, a simple way of using progressive overload in your training is to use a weight where you can do all of your sets at the same rep range but have the difficulty increase set-to-set as fatigue accumulates. It is not necessary to always have the last set go all the way to technical failure, but it should be done somewhat frequently (once every 4 weeks or so) in order for us to know that our level of intensity is sufficient to provide us with the strength adaptations we want (within 5 reps to failure). Regardless, we always want at least one set per exercise to be within the 5 reps to failure range.
If you are someone who is looking to start training or just to break through a plateau, send us an email or give us a call and one of our many qualified professionals can help give you a place to start!
References
- Helms, 2015
- Schoenfeld, 2016